Shop Options:

Mini-Ramp, 70 x 15, 16K

Price: $12,757.00
Add to Cart Go to Cart Continue Shopping
Model Number: 16MR7015

*Images may or may not be your exact model. Images are for reference only.

MINI-RAMP (MR)
All Welded Steel Construction Build To Last
Don’t interpret incorrectly thinking that small means “not as tough”. There are a world of applications that have a
target height that is one-half or less of normal dock height. When your high side is 33” or less you might consider
this economical solution.
MINI RAMP With the optional mobility package the Mini
does not need the hydraulic actuated under-
carriage to move it to the work. Two screw
jacks with rigid steel casters are mounted at
the balance point and a couple of people can
move it on a hard surface. Floor plate approach
both top and bottom insure a long life on the
grating whether you are using manual
equipment or forklift trucks.
Capacities start at 12,000# and go up from
there. Widths of 70” & 84” and lengths starting
at 15’. Call for special sizes and capacities.
Mini Ramp shown with Screw Jack option.
Features for Mini Loading Ramps
•Curb design same as Full Size Ramp
• 8" of curb above drive surface
• Steel Diamond Deck Approach Plates (top & bottom)
• Serrated steel grating for traction & self cleaning
• Capacities from 12,000 lbs to 60,000 lbs
Options for Mini Loading Ramps
Mobility package – use the wheels to move the ramp into position.
The hand cranks rotate 90 degrees and self store.
STEEL MINI RAMPS MODEL MR
Mini ramps are a smaller version of a yard ramp. Used for dock to ground applications where the dock is 18-32" high. Typically for fork lift use.
MINI RAMP
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
PRICING
Model
Capacity
(lbs)
Width
Usable Width
Length
Weight
(lbs)
Price
12,000
70"
64"
15'
2254
$11,439
12,000
84"
78"
15'
2300
$13,758
12,000
94"
88"
15'
3026
$15,403
16,000
70"
64"
15'
2254
$12,757
16,000
84"
78"
15'
2265
$15,252
16,000
94"
88"
15'
3240
$17,474
20,000
70"
64"
15'
2626
$12,801
20,000
84"
78"
15'
2933
$15,489
30,000
70"
64"
15'
2986
$13,734
30,000
84"
78"
15'
3295
$16,663
Mini Ramps Screw Jack and Wheel (Per Pair)
120
$891
Dock mounted chain bracket
6
$150
MINI-RAMP UNLOADING INSTRUCTIONS
FLAT BED
Shipped on its side:
1. Remove any and all shipping rigging (i.e. straps, clamps, chains, etc.).
2. Using a lifting strap, wrap around the lift lug located on the top side.
3. Lift unit off the truck.
4. Have truck drive out from under the raised unit if possible.
5. Lower unit onto ground surface.
6. Tilt the ramp unit such that it will be laid over slowly using the lift.
7. Attach the screw jacks to both sides and raise the unit before moving.
Shipped right side up:
1. Remove any and all shipping rigging (i.e. straps, clamps, chains, etc.).
2. Using lifting straps, lift the unit from four points so that the unit will be lifted in the same position.
3. Have the truck move out from under the suspended unit.
4. Slowly lower the unit onto surface.
5. Attach the screw jacks to both sides of unit and raise the unit.
6. Manually move the unit into position.
CLOSED TRUCK OR CONTAINER
Shipped right side up:
1. Remove any restraining equipment.
2. Raise the unit.
3. Attached the screw jacks (if purchased).
4. Raise the unit with the screw jacks until the unit is off the ground.
5. Manually push the unit out of the truck/container.
6. Move to position.
CAUTION:
These instructions are strictly a suggested method to unload your equipment by the manufacturer.
Personnel unloading should consider all safety practices to safely unload the unit. Also, when the unit is
in use, the unit should be secured and screw jacks completely raised off the ground surface.
Mini-Ramp, Mobile Yardramp, Mobile Yardramps, Portable Yardramp, Portable Yardramps, Steel Yardramp, Steel
Yardramps, Yardramp, Yardramps, Fork Lift Ramp, Portable Fork Lift Ramps, Forklift Ramp, and Portable Forklift
Ramps from your complete source for material handling equipment.