OPTIONAL
ACCESSORIES FOR WORK STATION JIB CRANES
|
|
|
|
|
|
|
|
|
FESTOON
CLAMPS |
|
|
Festoon
clamps anchor the festooning at the start of the jib boom. They
also prevent the festoon gliders from exiting the track and they can provide
a redundant stop for the trolley. Festoon clamps for vacuum hose are also
available (not shown). |
|
|
|
|
|
|
FESTOON
GLIDERS |
|
Festoon
gliders are used to support flat electrical cable along the jib boom.
No tools are required to attach the festooning to the gliders. One festoon
clamp is required with the use of festoon gliders. Not available for AL100
jibs. |
|
|
|
|
|
|
|
|
|
|
FESTOON
TROLLEYS |
|
Festoon
trolleys are used to support flat cable, air hose or round cable
along the jib boom. The trolleys have four wheels and a pivoting festoon
saddle
support. Festoon trolleys for vacuum hose are also available (not shown).
One festoon clamp is required with the use of festoon trolleys. |
|
|
|
|
|
|
|
|
|
FLAT
CABLE AND/OR AIR HOSE |
|
A
flat cable festooning system is required when using an electric powered
lifting device. Air hose is also available and is supported by festoon trolleys. |
|
|
|
|
|
|
FOUR
RING ELECTRICAL COLLECTOR (Top or Bottom Entry) |
|
A
collector is needed to provide a continuous 360° boom rotation when
using an electric powered lifting device. A bottom entry collector requires
four
(4) additional inches of clearance above the pivot pin. A top entry collector
requires 11-1/4 additional inches of clearance above the pivot pin. |
|
|
|
|
|
|
|
|
AIR
SWIVEL (Top or Bottom Entry) |
|
WSJ360
PORTABLE BASE |
An
air swivel is needed to provide a continuous 360°
boom rotation when using an air powered lifting device.
A bottom entry air swivel requires an additional five (5)
inches of clearance above the pivot pin. A top entry air
swivel requires between 8-1/2 to 9-1/2 inches (depending
on span and capacity) of additional clearance above the
pivot pin. |
|
To
allow a WSJ360 to be lifted with a lift truck and
transported to multiple locations, a portable base is
required. |
|
|
|
|
VACUUM
PLATFORM ATTACHMENT |
|
If
a vacuum lifter motor/blower is required to be
mounted on the mast or building column, then a
specially-designed vacuum blower support platform
attachment can be designed for this specific application. |
|
|
|
|
MANUAL
ROTATION STOPS |
|
To
limit the WSJ360 rotation to less than 360° to prevent
boom damage to machines, equipment or building
structures, rotation stops are required. |
|
|
|
|